here is something to pass on to my repair weenie friends
simple to make and it works this is a proto type but I can see this as a useful tool
and you can add a stiffener between the too slats to increase pressure. The big advantage is
how far back you can go
from my shop to yours
jh
inside brace
-
- Posts: 7027
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
inside brace
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 354
- Joined: Fri Sep 07, 2018 12:43 pm
- Location: Kansas City, MO
-
- Posts: 699
- Joined: Sun Sep 08, 2013 11:39 pm
- Location: Ladysmith, BC
Re: inside brace
I love these ingenious ideas - now you just have to glue the other half of the guitar back on, and you're good to go . . .