Martin Jumbo - Rosewood Kit
-
- Posts: 55
- Joined: Fri Jan 24, 2020 5:35 pm
Re: Martin Jumbo - Rosewood Kit
Well, it took me a few weeks, but I got my inlay in. This was a lot of fine and it took me several hours. The photo below is with it glued in place, now I need to do the filler around the edges.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 572
- Joined: Wed Feb 13, 2019 9:52 am
- Contact:
Re: Martin Jumbo - Rosewood Kit
this is super nice. i can't wait to see this one all done up.
-
- Posts: 699
- Joined: Sun Sep 08, 2013 11:39 pm
- Location: Ladysmith, BC
Re: Martin Jumbo - Rosewood Kit
Not a lot of filling to do there - looks great!
-
- Posts: 3267
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Martin Jumbo - Rosewood Kit
You did a very good job!
-
- Posts: 55
- Joined: Fri Jan 24, 2020 5:35 pm
Re: Martin Jumbo - Rosewood Kit
I am taping off the parts I don’t want to spray. What about the sides of the fretboard?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3267
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Martin Jumbo - Rosewood Kit
I would tape it off as well.
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: Martin Jumbo - Rosewood Kit
When I have a question like this, I look at my '74 Martin 000-28 - had it since new. It has finish all the way up to the top edge. And don't forget to make sure that edge is NOT flat still, but curved nicely into the neck. Hans Brentrup (fantastic mandolin and guitar maker who retired 4-5 years ago) said that he always made sure he could see both edges of the fretboard when he held the instrument up looking from the back. This is true of my Martin also.
Ed
Ed
Ed M
-
- Posts: 55
- Joined: Fri Jan 24, 2020 5:35 pm
Re: Martin Jumbo - Rosewood Kit
First coat of Shellac applied. Overall I’m pretty happy with the results.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 55
- Joined: Fri Jan 24, 2020 5:35 pm
Re: Martin Jumbo - Rosewood Kit
I also wanted to show you all what I build for a spray booth. It has PVC walls with plastic on all sides and top. The plastic is taped with standard packing tape to the PVC “studs”. I got an inline 6” duct fan from a friend and vented it out the lower back of the booth and ducted it out an existing dog door into my shop. I put a nice HVAC filter on the intake above the door. The door is just a scrap piece of plywood that fit the opening perfectly. The duct tape around the edge of the door acts kinda like a seal.
I built a 2x4 hanging rod from the wall with some bike hooks screwed into it. I put a 3/4” pipe coming off the wall to put the guitar on when I spray it. Overall I am very happy with the setup.
Sorry about all the photos being sideways. I can’t figure out how to fix that as I post from my iPhone.
I built a 2x4 hanging rod from the wall with some bike hooks screwed into it. I put a 3/4” pipe coming off the wall to put the guitar on when I spray it. Overall I am very happy with the setup.
Sorry about all the photos being sideways. I can’t figure out how to fix that as I post from my iPhone.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland