repairing a guitar top
-
- Posts: 7027
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
repairing a guitar top
this is an article I wrote for the guitarmaker magazine
we get first crack at it hope you find it useful
we get first crack at it hope you find it useful
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: repairing a guitar top
Nice article, John. When you condition the surface of the fingerboard after fret removal, do you ever run across a situation of sanding through the pearl? I'm presuming radiussing means taking the pearl down, too.
-
- Posts: 7027
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: repairing a guitar top
the pearl is .060 thick never had that issue as vintage is solid shell
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 2354
- Joined: Sat Apr 10, 2010 10:50 pm
- Location: Seattle
- Contact:
Re: repairing a guitar top
Thanks for the article! What do you use to fill the fret board divots?
John
John
-
- Posts: 7027
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: repairing a guitar top
I find CA works I can also chop with a razor blade and "fluff" the fretboard , works on rosewood. Learned this trick from Frank Ford FRETS.com
great site and one to bookmark
great site and one to bookmark
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 15
- Joined: Mon Jul 02, 2018 12:21 pm
Re: repairing a guitar top
Nice article!
-
- Posts: 2354
- Joined: Sat Apr 10, 2010 10:50 pm
- Location: Seattle
- Contact:
Re: repairing a guitar top
Thanks John! The method is really clever working fibers from the bottom of the divot up to the fretboard plane and filling both underneath and around with end grain sanding dust.tippie53 wrote:I find CA works I can also chop with a razor blade and "fluff" the fretboard , works on rosewood. Learned this trick from Frank Ford FRETS.com
great site and one to bookmark
The color did not really change just the picture and a bit of finger board oil, I only did the top four fret locations.
[/quote]
-
- Posts: 7027
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: repairing a guitar top
glad to pass on what I learned. This is a tip from FRETS.COM My friend Frank Ford
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: repairing a guitar top
johnparchem and John Hall
Do you have trouble matching the color? Could you describe your technique? I watched Frank do it, but in my couple of attempts at something similar I have not had good luck
Ed
Do you have trouble matching the color? Could you describe your technique? I watched Frank do it, but in my couple of attempts at something similar I have not had good luck
Ed
Ed M
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: repairing a guitar top
I checked out the example Mr Ford posted (http://www.frets.com/FretsPages/Luthier ... divot.html). Very interesting. The board looks nice right after completion. How durable is the repair?