new dovetail video

[tippie53]

Here is a new video; an addendum to help you understand and get the dovetail set.

[Ben-Had]

Got my reference time marked down on this one. Nice job, John.

[tippie53]

this is by far one of the best Dovetail videos I have done
glad you guys enjoy what Glenn and I do .
thanks guys

[Danl8]

Thank you, thank you, John. I will be setting two dovetail joints over the holiday this week and the addendum video comes at a really good time. (These will be my first traditional dovetail necks.)

[tippie53]

I am here to help

[johnnparchem]

This is a great dovetail setting video, very clear and well made.

[Jcolvin]

Absolutely fantastic! Thank you so much for your help via these videos, John. Last week I closed up the box on my second build, opened up the mortise of the dovetail on the body, slid in the neck, put the straight edge across, and measured 3/32" gap...at the neck joint! The straight edge was touching at the nut and saddle location only. I thought I was doomed. But using the steps you work through in the video, and following A.C.E. I had a fit and angle I couldn't be happier with, in less than an hour. Thanks again John. Great video.

[tippie53]

So happy your guitar came out well. This is why Glenn and I do the videos and why Tommy runs this show , we really mean it when we way , we are here to help.

[B Shuler2006]

What a great video! Thanks John for all you do!

[tippie53]

You are most welcome