Third application of Z-poxy on my Numbers 3 and 4 guitars. I am following Todd Stocks Youtube video schedule, and working well. First guitar is the OM w/ African Mahogany Zebrawood trim/bindings/radial rosette and Lutz top. Second is Prairie State Jumbo Madagascar Rosewood with Curly Koa bindings/trim and Bearclaw Sitka top. I can honestly say, pore filling is NOT my favorite task :-)
Glenn
Final Pore Fill on # 3 and #4
-
glasalle1
- Posts: 190
- Joined: Sun Aug 22, 2010 5:02 pm
Final Pore Fill on # 3 and #4
You do not have the required permissions to view the files attached to this post.
-
johnnparchem
- Posts: 2354
- Joined: Sat Apr 10, 2010 10:50 pm
- Location: Seattle
- Contact:
-
Kevin Sjostrand
- Posts: 3985
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: Final Pore Fill on # 3 and #4
Beauties from where I'm sitting.
-
glasalle1
- Posts: 190
- Joined: Sun Aug 22, 2010 5:02 pm
Re: Final Pore Fill on # 3 and #4
Thanks guys. What I find interesting is the Z-poxy flows really nicely over the African Mahogany (3rd guitar built with African Mahogany, and using z-poxy), but was more difficult to apply to the Madagascar Rosewood. It just didn't flow nearly as nice wrt coverage. Not sure if the oils/resin in the rosewood affects this, but interesting none the less.
Glenn
Glenn
-
justrfb
- Posts: 217
- Joined: Wed Aug 22, 2012 8:17 am
- Location: North Jersey
Re: Final Pore Fill on # 3 and #4
Very nice!... Looking forward to seeing more pictures of your progress.
Sincerely,
Rich
Sincerely,
Rich