Vid Shoot
-
- Posts: 7141
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Vid Shoot
I am doing a vid shoot on Fri
One topic will be about braces and how they work
Post a subject you want to see and we will try and work it in
One topic will be about braces and how they work
Post a subject you want to see and we will try and work it in
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 3986
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: Vid Shoot
Ahhhh, installing abalone side purfling please.
I appreciate your videos and help John!
Kevin
I appreciate your videos and help John!
Kevin
-
- Posts: 7141
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Vid Shoot
that is on the list actually
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 193
- Joined: Fri Oct 01, 2010 5:19 pm
- Location: Glen Burnie Md
Re: Vid Shoot
How about adjusting intonation at the saddle. Suggestions on what tuners work for you for this operation and how to adjust. Or how bout a Blues Creek blooper reel. Haha.
kyle
-
- Posts: 277
- Joined: Fri Nov 25, 2011 10:20 am
- Location: Cumming, GA
Re: Vid Shoot
How about how you install the end piece on the guitar?
Rick Gunn
Rick Gunn
-
- Posts: 7141
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Vid Shoot
the intonation and compensation was touched on in 2 vids but we can try and clear a few things up on that subject.
Please give me a list of specific question to address
Please give me a list of specific question to address
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: Vid Shoot
How to MAKE SURE your neck will fit right before and during gluing up the box.
Ed Minch
Ed Minch
Ed M
-
- Posts: 193
- Joined: Fri Oct 01, 2010 5:19 pm
- Location: Glen Burnie Md
Re: Vid Shoot
Sorry John I must have missed the ones you talked about intonation in. A lot of my concern is about the tuners being used. I know the more you spend the more accurate the equipment is going to be but in reality with some movement in the neck and string changes how accurate is accurate enough?
I also have problems with getting things right. Seems I tend to take off too much off of the saddle, even though it doesn't seem like it. Maybe that has to do with the accuracy of the clip on tuner I use. Thanks for considering this topic John.
I also have problems with getting things right. Seems I tend to take off too much off of the saddle, even though it doesn't seem like it. Maybe that has to do with the accuracy of the clip on tuner I use. Thanks for considering this topic John.
kyle
-
- Posts: 7141
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Vid Shoot
I will try and do something about this
john
john
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com