I am current working on mounting my newly purchased "Binding Tower" to a vice on my Sjobergs. I will post pictures soon. I bought the unit from John at BluesCreek. It seems like a very well made unit.
VP
Gobar deck built on my Sjobergs bench
-
Victory Pete
- Posts: 51
- Joined: Fri Jan 06, 2012 7:22 am
-
Ben-Had
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: Gobar deck built on my Sjobergs bench
How tall is the setup from bench top to top's bottom?
Tim Benware
-
Victory Pete
- Posts: 51
- Joined: Fri Jan 06, 2012 7:22 am
Re: Gobar deck built on my Sjobergs bench
Can you clarify what you want me to measure? This may help viewtopic.php?f=4&t=5869Ben-Had wrote:How tall is the setup from bench top to top's bottom?
VP
-
Ben-Had
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: Gobar deck built on my Sjobergs bench
Sorry, I was talking about the go bar deck. How far off the bench top is the bottom of the go bar top? And of course I guess that the length of the go bars you are using would be part of the equation.
Tim Benware
-
Victory Pete
- Posts: 51
- Joined: Fri Jan 06, 2012 7:22 am
Re: Gobar deck built on my Sjobergs bench
Ben-Had wrote:Sorry, I was talking about the go bar deck. How far off the bench top is the bottom of the go bar top? And of course I guess that the length of the go bars you are using would be part of the equation.
Because it is on threaded rods it is variable. My "Gobar Threaded" rods are 2 feet long, so I adjust it so the measurement would be 2 feet plus whatever material I am gluing. I can raise the deck to 3 feet because I used 3 foot rods. I use it this way for braces. For tops and and backs to sides I have another set of bars that I cut shorter.
VP
-
watergunn
- Posts: 277
- Joined: Fri Nov 25, 2011 10:20 am
- Location: Cumming, GA
Re: Gobar deck built on my Sjobergs bench
Very nice go bar deck. Love the bench also.
Mine is a breakast in bed table my ten year old made for the wife. I bolted two by twos to it and I clamp it to a router table when I use it.
My rods are strips off wood I ripped and I wrapped masking tape on the ends for a little gripping.
I think I need an upgrade!!!!
Mine is a breakast in bed table my ten year old made for the wife. I bolted two by twos to it and I clamp it to a router table when I use it.
My rods are strips off wood I ripped and I wrapped masking tape on the ends for a little gripping.
I think I need an upgrade!!!!
You do not have the required permissions to view the files attached to this post.
-
Victory Pete
- Posts: 51
- Joined: Fri Jan 06, 2012 7:22 am
Re: Gobar deck built on my Sjobergs bench
It is great to create your own jigs and methods.watergunn wrote:Very nice go bar deck. Love the bench also.
Mine is a breakast in bed table my ten year old made for the wife. I bolted two by twos to it and I clamp it to a router table when I use it.
My rods are strips off wood I ripped and I wrapped masking tape on the ends for a little gripping.
I think I need an upgrade!!!!