Project - ideas needed

[deadedith]

Update: Tim is providing strings. Thanks Tim!
David L is providing matching headstock blanks and endgrafts. Thanks David!


Still needed: reverse rounded kerfing and black fiber binding.

Thanks in advance!

[tippie53]

if you need anything let me know . We will get what you need . Again thanks for all the support . You can all be proud of this project.

[deadedith]

I forgot something - nuts saddles and bridge pins!!!! Alert!!


Ken Cierp is chipping in the rr kerfing, so all that is left is the stuff I forgot above, and the black fiber binding.

[tippie53]

I have the black fiber and pins. If no one kicks that in let me know.

[deadedith]

John, the only thing left at this time is the BLACK FIBER BINDINGS. :-) So thanks!

[deadedith]

Summary to date (7/21/11)

John Hall (Blues Creek Guitars) - 3 necks , blocks , truss rods and tuners, fretboards and fretwire, BLACK FIBER BINDING :-).

Ken Cierp (KMG) - tops, backs and sides, bridges, rosettes, brace material, rr kerfing

Herman - is sending two european spruce tops

Bob Cef (RC Tonewoods) - a set of back and sides

TimB is providing strings, bone nut/saddle blanks, plastic pins

David L is providing matching headstock blanks and endgrafts. (EIR - will match fretboards and bridges)

Mike (mjmeehan) offered to provide the nuts and saddles, but TimB got there first. Thanks Mike and I will keep you in the on-deck circle!!

To all: thank you so much. Once I get started I will keep you posted continually.

[deadedith]

Nuts, saddles, pins and strings arrived today.
Thank you Tim B!

[deadedith]

A nice set of Sapele back and sides arrived from Bob Cefalu (RC Tonewood)-

Thank you very much Bob!

[deadedith]

UPS just showed up with some goodies from John Hall!

3 Neck assemblies - necks, fretboards, fret wire, strings, and truss rods; and tuners, nice ones.

Thank you so much John.

A blessing on all who have/will contribute to this cause.

[deadedith]

USPS just delivered too!

A shout of thanks to Herman, who sent a couple of nice European Spruce tops.

A shout of thanks to David Lewis for the eir headplate veneer/endwedge material via Bob Cef.

Both of you - well, I've already shouted thanks!

I will post pix of all this stuff once it has all arrived.