Inexpensive new tool
-
- Posts: 687
- Joined: Sun Sep 08, 2013 11:39 pm
- Location: Ladysmith, BC
Inexpensive new tool
While setting up a new 12-string, I went through many destringings and restringings. I left the strings attached at the peghead while adjusting the saddle, and found I spent a lot of time untangling strings to get them back on the guitar - especially with twice as many lighter gauge strings. I tried tying them into a bunch with tape, which didn't help. Then I made this "tool" to hold them in some order, and it worked. I'm sure someone else has done this, and maybe there is even a commercial version out there somewhere, but it was new for me, and if it helps someone, good. It made life a whole lot easier, and for the cost of a cereal box. Bruce W.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 347
- Joined: Fri Sep 07, 2018 12:43 pm
- Location: Kansas City, MO
Re: Inexpensive new tool
Very clever! I got to make one because those runaway strings are the devil. I throw a capo as high as possible, but things still get tangled. Thanks for sharing!
Kevin Doty
Kansas City
Kansas City
-
- Posts: 561
- Joined: Mon Jul 09, 2012 9:49 pm
Re: Inexpensive new tool
Just think of the fun that awaits someone who's built a pinless 12-string bridge...with a slothead.
peter havriluk
-
- Posts: 3257
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Inexpensive new tool
I love this idea. Even 6 strings get tangled, which is irritating. Thanks for the idea. Archtops are particularly vexing creatures when replacing the nut. This idea is great.