Have you ever done anything you end up not liking?
-
- Posts: 3257
- Joined: Sun Mar 09, 2014 8:13 pm
Have you ever done anything you end up not liking?
My second "scratch" inlaid fretboard was a hummingbird vine, that I designed and inlaid. Frankly, I've never really liked it. It looked better on paper. I didn't like the colors of the flowers or leaves.
Peal sustainability is becoming an issue. The cost increases and CITES and the Lacey Act restrict importation. So I'm experimenting with epoxy and interference pearl colors. Some I'm pouring directly into the inlay pockets and I'm also pouring thin molds, to later cut out by coping saw (like pearl) or by cnc.
I've just started, so I'm still learning.
Back to the fretboard: I pulled out the red flowers and used pearlized epoxy. I did the same for the leaves, using green interference powder and a drop of translucent green.
It's better, I think. I know it needs some relief to add interest to the flowers and leaves.
Peal sustainability is becoming an issue. The cost increases and CITES and the Lacey Act restrict importation. So I'm experimenting with epoxy and interference pearl colors. Some I'm pouring directly into the inlay pockets and I'm also pouring thin molds, to later cut out by coping saw (like pearl) or by cnc.
I've just started, so I'm still learning.
Back to the fretboard: I pulled out the red flowers and used pearlized epoxy. I did the same for the leaves, using green interference powder and a drop of translucent green.
It's better, I think. I know it needs some relief to add interest to the flowers and leaves.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3729
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: Have you ever done anything you end up not liking?
I like it better now too Diane.
Being able to pour a liquid into a cavity I think is an awesome way to do inlay's.
I have plenty of my new "Sjostrand" MOP logos probably will last me for the rest of my guitar builds
but I'd like to experiment with colored or pearlized epoxy like you did. I even already have the powder
Anyway, that fretboard is awesome my dear! :)
Being able to pour a liquid into a cavity I think is an awesome way to do inlay's.
I have plenty of my new "Sjostrand" MOP logos probably will last me for the rest of my guitar builds
but I'd like to experiment with colored or pearlized epoxy like you did. I even already have the powder
Anyway, that fretboard is awesome my dear! :)
-
- Posts: 567
- Joined: Wed Feb 13, 2019 9:52 am
- Contact:
Re: Have you ever done anything you end up not liking?
I love it, it's beautiful. This would be a treasure and heirloom to anyone who owned it.
-
- Posts: 3257
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Have you ever done anything you end up not liking?
Kevin,Kevin Sjostrand wrote: ↑Fri Jun 04, 2021 2:27 pm I like it better now too Diane.
Being able to pour a liquid into a cavity I think is an awesome way to do inlay's.
I have plenty of my new "Sjostrand" MOP logos probably will last me for the rest of my guitar builds
but I'd like to experiment with colored or pearlized epoxy like you did. I even already have the powder
Anyway, that fretboard is awesome my dear! :)
I found that in some instances, the interference powder wasn't quite enough color. I have 24 jars of mica color, but the mica will have a tendency to settle out. Plus, the powdered colors are pretty opaque, obscuring the pearlescent interference powder. I bought a set of liquid color that's translucent. I can add a drop, like violet, to enhance the violet colored interference powder. It won't settle out and it allows the pearl still shine.
I've got 2 different epoxies; one is a thin viscosity, the other thicker. For pouring directly into a fretboard, definitely go for thicker, otherwise the thin follows the fret slots and you'll have a mess to clean (even with slot dams).
I've poured a couple of small molds, 1.5mm thick, so it can be cut the traditional way, with a jeweler coping saw. It cuts wonderfully. The feel is like pearl. Thin viscosity is definitely better in this instance, but depending on what effect you want, you might want it to start to thicken.
I got a little kitchen butane torch to get rid of bubbles. In fact, I liked it so much, I bought a second one for the kitchen. Haha! It was $10.
https://www.amazon.com/dp/B08NJVZNBL/re ... UTF8&psc=1
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3729
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: Have you ever done anything you end up not liking?
That looks pretty good.
-
- Posts: 241
- Joined: Mon Dec 03, 2018 9:12 am
Re: Have you ever done anything you end up not liking?
Yep.
Built a guitar out of oak. It’s my big bluegrass loud guitar.
I let the art center borrow it for display for a month.
That’s what I’m regretting, because jams are opening back up, lol.
Built a guitar out of oak. It’s my big bluegrass loud guitar.
I let the art center borrow it for display for a month.
That’s what I’m regretting, because jams are opening back up, lol.
-
- Posts: 560
- Joined: Mon Jul 09, 2012 9:49 pm
Re: Have you ever done anything you end up not liking?
Regrets? How about every (6) guitar I ever made? Every one of them could benefit from builder's hindsight.
peter havriluk
-
- Posts: 3257
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Have you ever done anything you end up not liking?
We all have builder's hindsight. I can find something on every one of the 20+ guitars I've built too. I think we all strive to do better. That's the sign of a good luthier.
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: Have you ever done anything you end up not liking?
If judging a guitar means does it play well and sound good, then my #1 and #2 are among my best. If it means are the details well done not so much
Ed M
-
- Posts: 560
- Joined: Mon Jul 09, 2012 9:49 pm
Re: Have you ever done anything you end up not liking?
Not too often. Just on every guitar I've made.
peter havriluk