how to copy a neck vid

Some you may know, all worthy of a look.
Post Reply
tippie53
Posts: 7085
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

how to copy a neck vid

Post by tippie53 »

here is a new video on you tube
https://www.youtube.com/watch?v=R8UmlGHUKy0
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
MaineGeezer
Posts: 1746
Joined: Wed Aug 13, 2014 12:14 pm

Re: how to copy a neck vid

Post by MaineGeezer »

When I click on the link, I get a message that the video does not exist.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
tippie53
Posts: 7085
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: how to copy a neck vid

Post by tippie53 »

John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Danl8
Posts: 740
Joined: Mon Jul 28, 2014 7:50 am
Location: Chadds Ford, PA

Re: how to copy a neck vid

Post by Danl8 »

Nice video and idea for getting the shape copied! On the subject of necks, (maybe you've done this already) it would be of interest to have a video on how to carve the back of neck/head/volute area. I notice that Martin models this area with some variability. I've done two so far with good results, but it is really intimidating. Seeing others' approach would be good.
-d.
B Shuler2006
Posts: 48
Joined: Thu Mar 05, 2015 5:33 pm
Location: Indiana

Re: how to copy a neck vid

Post by B Shuler2006 »

Great video John! I have a Martin with a low oval I like and this help out! I'm wondering, how thin can I go on the profile without the neck snapping under tension?
Brandon Shuler
Shuler Guitars
tippie53
Posts: 7085
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: how to copy a neck vid

Post by tippie53 »

It depends
I have not seen strings snap one but I have seen truss rods go through
I will post some neck specks later I have them somewhere
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply