Authentic bracing at the factory
-
- Posts: 67
- Joined: Thu Jul 11, 2013 8:07 am
- Location: Central NY
Authentic bracing at the factory
I was at the guitar makers connection yesterday picking up some stuff. Huge thanks to Gail, as always she was extremely helpful. I also went down to the martin factory and decided to take the tour. I got these pics of an authentic getting the finishing touches on the braces.
You do not have the required permissions to view the files attached to this post.
Last edited by Chuck73 on Wed Apr 01, 2015 9:50 am, edited 2 times in total.
-
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: D authentic bracing at the factory
Hey it must have been you that she was with when I called yesterday to place an order. It must have been a big one because she never called back:)
Tim Benware
-
- Posts: 7075
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: D authentic bracing at the factory
that top is a 000 or OM
note the 1 in bridge plate a Dred would be slightly different shape and 1 3/4 in plate.
note the 1 in bridge plate a Dred would be slightly different shape and 1 3/4 in plate.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 67
- Joined: Thu Jul 11, 2013 8:07 am
- Location: Central NY
Re: D authentic bracing at the factory
You're right John, I misjudged the shape because of those alignment ears on the waist. I'll edit the title, thanks for the heads up. Tim, it was probably me, I was there from about 12:40-1:30. They are pretty backed up there, they've been short handed for the past couple of months and will be for a few weeks more.
-
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: Authentic bracing at the factory
I noticed this is written on the top.
You do not have the required permissions to view the files attached to this post.
Tim Benware
-
- Posts: 67
- Joined: Thu Jul 11, 2013 8:07 am
- Location: Central NY
Re: Authentic bracing at the factory
Possibly 000 torrified for the OM-28 authentic '31? The man doing the braces said it was an authentic top.
-
- Posts: 85
- Joined: Tue Jul 01, 2014 6:37 pm
- Location: Napa, CA
Re: Authentic bracing at the factory
Great shots... going to make 000 just like this.... trying to see if the scalloping on the lower x braces are symmetrical on the bass side vs the treble side... or if the base side has a deeper cut to it? Did u happen to notice? I can't quite see any difference in these pics.
Thanks , T
Thanks , T
-
- Posts: 67
- Joined: Thu Jul 11, 2013 8:07 am
- Location: Central NY
Re: Authentic bracing at the factory
I didn't have time to examine it too closely, the guide had already moved on by the time i was able to get close enough to photo. I would have loved to have spent some time examining it and taking measurements.
-
- Posts: 85
- Joined: Tue Jul 01, 2014 6:37 pm
- Location: Napa, CA
Re: Authentic bracing at the factory
I'm sure if they let you take measurements you'd have to buy the guitar at full price....
Thanks Chuck, for the pics, well done... T
Thanks Chuck, for the pics, well done... T
-
- Posts: 7075
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Authentic bracing at the factory
here is a top from a 1931 era OM that uses very similar bracing
viewtopic.php?f=54&t=5424&p=24596&hilit=1931+top#p24596
viewtopic.php?f=54&t=5424&p=24596&hilit=1931+top#p24596
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com