Medical Clamp
Posted: Thu Jul 28, 2011 6:35 am
Most of you know I've been dealing with serious health problems for some time now, but I'm still hopeful, and look forward to working on my guitars again someday...right now I'm working on a dulcimer project just to keep me somewhat active and occupied.
The other day I had to have some blood work done and as most know, they usually wrap the entry point with a bit of gauze and some cohesive bandage.
After a bit, it was really tight and bothering me so I removed it while waiting for the wife, and sat there pulling on it and generally messing with it and it suddenly dawned on me... "This stuff would make a great CLAMP" on hard to hold items such as fingerboards, headstock plates, nuts and OTHER items or situations that require a tight, reliable clamp that won't scratch or mar your project on a surface that calls for special cawls and the like, so I went back in and ask the nurse for a roll as an experiment, she graciously obliged me and this stuff works great!
It's cheap, at generally less than a $1 for 5 yds of 1 inch, it can be tightened as tight as one would ever want, as long as you overlap 3-4" it won't come loose until you want to remove it. You can get it in different colors so you can always FIND IT on your bench. It tears easily, no cutting needed.
It seems most Drug stores carry it...I haven't had the chance to check places like Wal-Mart etc, but I will...it's also available on-line here's one source, and this brand is latex free if that's a problem for you (It is for me!).
Dlon't laugh, Give it a try, you'll be amazed!
Ray
http://www.quickmedical.com/andover-cof ... dages.html
The other day I had to have some blood work done and as most know, they usually wrap the entry point with a bit of gauze and some cohesive bandage.
After a bit, it was really tight and bothering me so I removed it while waiting for the wife, and sat there pulling on it and generally messing with it and it suddenly dawned on me... "This stuff would make a great CLAMP" on hard to hold items such as fingerboards, headstock plates, nuts and OTHER items or situations that require a tight, reliable clamp that won't scratch or mar your project on a surface that calls for special cawls and the like, so I went back in and ask the nurse for a roll as an experiment, she graciously obliged me and this stuff works great!
It's cheap, at generally less than a $1 for 5 yds of 1 inch, it can be tightened as tight as one would ever want, as long as you overlap 3-4" it won't come loose until you want to remove it. You can get it in different colors so you can always FIND IT on your bench. It tears easily, no cutting needed.
It seems most Drug stores carry it...I haven't had the chance to check places like Wal-Mart etc, but I will...it's also available on-line here's one source, and this brand is latex free if that's a problem for you (It is for me!).
Dlon't laugh, Give it a try, you'll be amazed!
Ray
http://www.quickmedical.com/andover-cof ... dages.html