Page 1 of 1

Ladder braced oak

Posted: Sun Sep 06, 2015 9:22 pm
by ruby@magpage.com
Just finished an oak + red spruce, ladder brace, 12 fret, J-185. It is my attempt at a fancy guitar based on some of the work that Gibson did on guitars and banjos in the 20's and 30's. It was a lot of fun and I was able to involve a couple of local craftspeople.

The oak and red spruce will take a while to open up, but for now it has that ladder braced sound with a bit less sustain and a bluesy sound.

Here is the guitar:

https://www.flickr.com/photos/ruby1638/ ... 776959267/

And for those of you who haven't seen this sort of thing enough times, here is the whole thing:

https://www.flickr.com/photos/ruby1638/ ... 776959267/

Ed

Re: Ladder braced oak

Posted: Tue Sep 08, 2015 7:57 pm
by Kevin Sjostrand
Looks real nice Ed. Super job on that butt joint. Who did the artwork on the fretboard?

Re: Ladder braced oak

Posted: Tue Sep 08, 2015 8:43 pm
by ruby@magpage.com
A local artist helped with the gold leaf, and another local artist did the pictures. In addition, a friend donated the Pearloid, and 3 amazing professionals gave plenty of advice on painting Pearloid and installing gold glitter. A fun time was had by all.

Ed

Re: Ladder braced oak

Posted: Wed Sep 09, 2015 9:22 am
by Diane Kauffmds
That's a great looking guitar Ed.

Re: Ladder braced oak

Posted: Tue Sep 15, 2015 7:51 pm
by Kevin Sjostrand
Well you ALL done good!

Re: Ladder braced oak

Posted: Wed Sep 16, 2015 7:42 pm
by Phil
Cool guitar!