First from Scratch Build
Posted: Sun Feb 11, 2024 1:19 pm
Just completed my first from scratch guitar build. Still need to finish it but I thought it would be good to post some photos of how it came out so far since over the past year I have been pestering members with questions of all kinds and the feedback has been invaluable. Thought it would be good to let the good people who helped me see what happened.
This guitar is my second guitar. The first was an OM kit from Blues Creek Guitars. This guitar is a OOO- 12 fret guitar that I built more or less from scratch. The guitar has cocobolo back and sides, European bear claw spruce top. One piece mahogany neck, ebony fret board, ebony with turquois stained veneered bindings, black and turquois stained veneer purfling, ebony headstock veneer and cocobolo random pieces for the tail and rosette. It has abalone fret dots and headstock inlay and clay fret board side dots in turquoise to match the bindings/purfling.
The basic look was inspired by a guitar featured on Jeff Jewett's custom guitar web site.
So here it is. Let me know if you have any questions. Just an FYI. Did run into some problems that I was able to get out of. A few minor cracks in the top bout during the bending process. Was able to stabilize with CA glue and basically can't see. Also, sanded through some of the veneer in the tail piece that I needed to remove and replace. No build, it seems, doesn't have these kind of problems.
This guitar is my second guitar. The first was an OM kit from Blues Creek Guitars. This guitar is a OOO- 12 fret guitar that I built more or less from scratch. The guitar has cocobolo back and sides, European bear claw spruce top. One piece mahogany neck, ebony fret board, ebony with turquois stained veneered bindings, black and turquois stained veneer purfling, ebony headstock veneer and cocobolo random pieces for the tail and rosette. It has abalone fret dots and headstock inlay and clay fret board side dots in turquoise to match the bindings/purfling.
The basic look was inspired by a guitar featured on Jeff Jewett's custom guitar web site.
So here it is. Let me know if you have any questions. Just an FYI. Did run into some problems that I was able to get out of. A few minor cracks in the top bout during the bending process. Was able to stabilize with CA glue and basically can't see. Also, sanded through some of the veneer in the tail piece that I needed to remove and replace. No build, it seems, doesn't have these kind of problems.