www.KitGuitarsForum.com

Learn to Kit Build a Guitar. Learn to Scratch Build a Guitar. Learn EVERYTHING Guitars Here!
https://www.kitguitarsforum.com/board/

Finishing Rosewood Bridge

https://www.kitguitarsforum.com/board/viewtopic.php?f=6&t=5306

Page 1 of 1

Finishing Rosewood Bridge

Posted: Tue Jun 05, 2012 10:06 am
by pjl1959
I make my own bridges. What's the best way to polish them so they have a similar satin finish to the Martin bridges from Stewmac, LMI, etc?

Paul
PJL1959

Re: Finishing Rosewood Bridge

Posted: Tue Jun 05, 2012 11:02 am
by Ben-Had
Before I got my buffer I would sand to 320, add a light coat of mineral oil and wipe off the excess.

Re: Finishing Rosewood Bridge

Posted: Thu Jun 07, 2012 6:33 pm
by B. Howard
Sand mine out to 1200 grit and apply a coat of paste wax, they just glow.
All times are UTC-04:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited