Page 1 of 1
Target coatings brush finish schedule
Posted: Tue Jan 17, 2012 4:02 pm
by tricktrack
Can some give me some advice for a schedule for the target coatings wb em2000 brush on finish. Do I need to use a pore filler paste then their pore filling brush on? Do I just use their pore fill brush on then the top coats? Do I need to use their shellac?????
Completely confused.
Thanks for any info
Re: Target coatings brush finish schedule
Posted: Tue Jan 17, 2012 5:17 pm
by Ben-Had
Best to follow their suggested schedule. They have a forum on their website where you can find info on compatibility issues and other issues by using the search. There is a ton of info on their products there. It's where I started when learning to spray EM600.
Re: Target coatings brush finish schedule
Posted: Wed Jan 18, 2012 10:07 am
by tricktrack
Does anyone see an issue with compatibility with timbermate pore filler target ultra seal amber weaker and the 2000 brush finish?
Re: Target coatings brush finish schedule
Posted: Wed Jan 18, 2012 8:26 pm
by B. Howard
I always test product compatibility by making sample boards. Run out the process you want to test on a scrap of wood, hopefully a cutoff from the project. I make detailed notes of each step on the back for future reference. I will sometimes run out 2 or 3 of them and test for abrasion resistance etc before committing to a project done that way.