Page 1 of 1

Spraying temperature

Posted: Mon Mar 07, 2011 1:44 pm
by deadedith
What is the minimum ambient temperature for spraying nitro? This would be in an open, well-ventilated area with humidity between 40-50%.
Thanks
DaveB

Re: Spraying temperature

Posted: Mon Mar 07, 2011 2:57 pm
by Tony_in_NYC
Dave,
Check out the reranch.com forum. Those guys spray when its cold. Most would not recommend it though. I sprayed rattle can sanding sealer at 40 degrees a few weeks ago. I dont see any difference, but I will be sanding it off, so it wont affect my finish. hopefully.

Re: Spraying temperature

Posted: Mon Mar 07, 2011 2:59 pm
by deadedith
I will check it out. Thanks Tony, I capish :-)
DaveB

Re: Spraying temperature

Posted: Mon Mar 07, 2011 4:38 pm
by tippie53
if your comfy the lacquer is comfy