Using Scotch Brite Pads

[klooker]

I'm getting close to start the finishing process on my Martin kit.

Are there any known issues with using Scotch Brite pads when doing light in between coats sanding with lacquer? I know that steel wool is bad because there are rust inhibitors that can affect the finish.

I like using the Scotch Brites because I find it easier to control them when sanding contoured surfaces as opposed to sandpaper.

Thanks,
Kevin Looker

[tippie53]

If you spray a coat within an hour or so , you don't need to scuff , the thinner will melt one coat into the next. I also use the scotch pads, ( maroon ).