Martin experimental soundboard patent

Tops only
Post Reply
AluminumTop
Posts: 44
Joined: Mon Nov 30, 2020 1:42 pm
Contact:

Martin experimental soundboard patent

Post by AluminumTop »

Does anyone know if this soundboard has appeared?

https://patents.google.com/patent/US202 ... 0210090529

Looks like a thin/thicker scheme to thin the edge ( like the Taylor "Relief Cut" )

Good Drawings show the idea.
tippie53
Posts: 7065
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Martin experimental soundboard patent

Post by tippie53 »

martin had produced a few of these aluminum tops in Rand D and had a production run but they never caught on. I am not sure if it was identical to the patent you showed , but I had seen them used. One used a carbon fiber bridge plate and it sounded pretty good. They also used them as a resonator. Time frame was early 2000
I also know they went through a patent phase about this time. here is a cutaway example

https://reverb.com/item/691581-martin-a ... ric-guitar
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
AluminumTop
Posts: 44
Joined: Mon Nov 30, 2020 1:42 pm
Contact:

Re: Martin experimental soundboard patent

Post by AluminumTop »

This is a recent patent, 2022 by inventor
Frederick E. Greene
Timothy A. Teel
Dreadnaught, Inc is assignee

Looks like a contoured thick mid/edge thinned plate with braces. interesting. I am still doing aluminum soundboards with a Lutnier who has made thousands of guitars over 45 years, He sees potential.
tippie53
Posts: 7065
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Martin experimental soundboard patent

Post by tippie53 »

the patent may be new but they had these in the works a while. I know Tim and may see him in a few weeks
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply