1950 Harmony Mandolin repair help

Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

1950 Harmony Mandolin repair help

Post by Kevin Sjostrand »

Well once again. I wrote a whole deal and when I went to submit it made my login in again and I lost what I wrote.
Hmmmm
I'm on my phone guess that's the problem

So a friend asked me to repair this Mandolin so I'm just asking for some suggestions on the best way to proceed.
The back has
come loose and is maybe twisted a bit.
I presume I need to humidity then remove the back and assess. Trying to push down and glue and clamp as is may not work as it's so tight. And the back overhangs the rim on one side for some reason....

I know some of you have done this kind of work so any help is greatly appreciated.
Best way to remove the back without too much disturbing the finish?
Thanks all

Kevin
You do not have the required permissions to view the files attached to this post.
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: 1950 Harmony Mandolin repair help

Post by Kevin Sjostrand »

More pics
You do not have the required permissions to view the files attached to this post.
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: 1950 Harmony Mandolin repair help

Post by Kevin Sjostrand »

More pics
You do not have the required permissions to view the files attached to this post.
MaineGeezer
Posts: 1711
Joined: Wed Aug 13, 2014 12:14 pm

Re: 1950 Harmony Mandolin repair help

Post by MaineGeezer »

I''d start by judiciously prying with a thin blade and see how far that got. With luck, it will be sufficient.

If your luck tends to be like mine though, the back will stay stuck, so you'll need to move on to Plan B and apply some heat. You can apply a clothes iron to edge just ahead of where you''re prying. Keep an eye on the finish so you don't scorch it.

Oh yeah -the sides will distort when you take off the back so the back won't fit when you go to reinstall it. You may need to build a mold you can use to force the sides to the proper shape.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: 1950 Harmony Mandolin repair help

Post by Kevin Sjostrand »

Hmmm using a mold is a novel idea I hadn't come up with that. I'm guessing it will take a little heat. I have a mini iron I use for this purpose. I know the back needs to come off so I'll go after that first. Thanks
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: 1950 Harmony Mandolin repair help

Post by tippie53 »

having repaired a few of these. I found that you can reglue them tite bond did well and used tape . May sound funny but did the lower end then reglued the upper. Saved having to make a mold. I used a few C clamps and taped between them
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: 1950 Harmony Mandolin repair help

Post by Kevin Sjostrand »

John are you saying to pull the back off and the reglue?
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: 1950 Harmony Mandolin repair help

Post by tippie53 »

What I do is reglue the loose area use a clamp at a few points to get the back aligned and then use tape .
Tite bond or fish glue both work. As long as the rest of the back is solid no need to tear it off.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: 1950 Harmony Mandolin repair help

Post by Kevin Sjostrand »

Sounds good. The back that's loose is pretty stiff. Probably dry. Seems to take much pressure to try and close. Would humidifying it help possibly make it more flexable?
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: 1950 Harmony Mandolin repair help

Post by tippie53 »

most likely it is what it is.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply