headstock repair

tippie53
Posts: 7072
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: headstock repair

Post by tippie53 »

getting closer Today I put on the top and back veneers. The head plate was originally .620 so I thinned the head plate so I could put a back veneer on. I also took some off the top so I could thicken the top veneer. These veneers hide the work underneath but will also add a great deal of strength to the repair. I stained the back so I can see if the color matches. Still have some finish sanding to do but feel good about the color.
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
tippie53
Posts: 7072
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: headstock repair

Post by tippie53 »

Did the finish work today color and sating. I must refret and put the tuners back on. Will post that later t his week
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Skarsaune
Posts: 254
Joined: Mon Dec 03, 2018 9:12 am

Re: headstock repair

Post by Skarsaune »

Super nice work
tippie53
Posts: 7072
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: headstock repair

Post by tippie53 »

the headstock looks crooked from the way I took the pic today I will hope to get the fret job done will post sound bite
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
tippie53
Posts: 7072
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: headstock repair

Post by tippie53 »

got this strung up today object was to keep it old looking so no gloss up. The guitar sounds very good the refret helped with the playability , the veneer tie ins made the repair tight. My customer is very pleased.
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
BEJ
Posts: 188
Joined: Tue Jan 17, 2012 12:38 am
Location: Seattle

Re: headstock repair

Post by BEJ »

Nice work, the guy gets his guitar back and 2 screws, can't beat that.

Bruce,
Post Reply