bridge repair

Post Reply
benvaneven
Posts: 1
Joined: Tue Jan 21, 2020 7:30 pm

bridge repair

Post by benvaneven »

Hi everybody,

A friend wants me to repair his Martin DCXE.
The bridge popped off.
The guitar is made of HPL laminate and the bridge should be glued on with
3M™ Scotch-Weld™ Plastic & Rubber Instant Adhesive PR1500.
This glue is hard to find. Any suggestions for an alternative?
Also I wonder if it would be wise to bold on the bridge after I glued it on because
it is the second time the bridge came off. Any advice is welcome :-)
bridge~1.png
label~1.png
greetings,
Ben van Even
You do not have the required permissions to view the files attached to this post.
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: bridge repair

Post by tippie53 »

call me
I have the glue part #
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Cbstark46143
Posts: 43
Joined: Sat Aug 30, 2014 5:49 pm

Re: bridge repair

Post by Cbstark46143 »

It appears to be readily available on eBay.

https://www.ebay.com/i/254232593501?chn=ps
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: bridge repair

Post by tippie53 »

the 3M pr 600 is what we were told by martin to use I also found that the locktite gel super glue works
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply