Hi everybody,
A friend wants me to repair his Martin DCXE.
The bridge popped off.
The guitar is made of HPL laminate and the bridge should be glued on with
3M™ Scotch-Weld™ Plastic & Rubber Instant Adhesive PR1500.
This glue is hard to find. Any suggestions for an alternative?
Also I wonder if it would be wise to bold on the bridge after I glued it on because
it is the second time the bridge came off. Any advice is welcome
greetings,
Ben van Even
bridge repair
-
- Posts: 1
- Joined: Tue Jan 21, 2020 7:30 pm
bridge repair
You do not have the required permissions to view the files attached to this post.
-
- Posts: 7085
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: bridge repair
call me
I have the glue part #
I have the glue part #
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 44
- Joined: Sat Aug 30, 2014 5:49 pm
-
- Posts: 7085
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: bridge repair
the 3M pr 600 is what we were told by martin to use I also found that the locktite gel super glue works
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com