1942 Gibson lg-2 Banner Mess

phavriluk
Posts: 554
Joined: Mon Jul 09, 2012 9:49 pm

Re: 1942 Gibson lg-2 Banner Mess

Post by phavriluk »

Any more progress to share?

Thanks!
peter havriluk
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: 1942 Gibson lg-2 Banner Mess

Post by Diane Kauffmds »

Actually, I have the box back together and binding back on. I've made the pickguard, but won't install it until very last. I've roughed in the bridge.

I'm getting ready to set the neck. I'm getting there, slowly. I've attempted to hide as much of the footprint of the ridiculous bridge, which was 8.5" long, and 1.5" wide, as much as possible. I can't hide the footprint, but I've minimized it somewhat. Plus it was way off center.

20210326_124810.jpg
You do not have the required permissions to view the files attached to this post.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: 1942 Gibson lg-2 Banner Mess

Post by Diane Kauffmds »

The Banner has a bridge and neck now. If you remember, someone had cut the fb extension through at the 14th fret. I glued back on so I could get the neck geometry right, but the only thing to glue it to was the dovetail. It hung in there throughout the reset process until the very last minute. But, that's okay, because I was able to get the geometry right. I got the fretboard extension lined up and glued back on with the neck.

The bridge is oversized by necessity to cover the damage. I made it as small as I could. It extends 1/8" beyond the spruce patch, above and below. I know it looks blocky. It's not nearly as big as the bridge I removed.

I'll have to adjust the pickguard to compensate.
You do not have the required permissions to view the files attached to this post.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: 1942 Gibson lg-2 Banner Mess

Post by tippie53 »

can you post the sizes and depth
I have a tracing for this and want to check accuracy before I make the molds
I think these are great guitars
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: 1942 Gibson lg-2 Banner Mess

Post by tippie53 »

I was rooting around my shop today and I actually found that I had bought an old gibson mold of this size
will post pics soon
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: 1942 Gibson lg-2 Banner Mess

Post by Diane Kauffmds »

tippie53 wrote: Fri Apr 16, 2021 6:32 am can you post the sizes and depth
I have a tracing for this and want to check accuracy before I make the molds
I think these are great guitars
Will do it today John.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: 1942 Gibson lg-2 Banner Mess

Post by Diane Kauffmds »

This is probably over kill for you John:

The Banner measurements are:

Neck: 3.49"
Mid upper bout: 3.57"
Waist: 3.92"
Mid lower bout: 4.25"
Tail: 4.42"

I don't know if you want this, but the heel is 1.76" wide and it's 0.66" tall.
20210421_104406.jpg
You do not have the required permissions to view the files attached to this post.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
AluminumTop
Posts: 43
Joined: Mon Nov 30, 2020 1:42 pm
Contact:

Re: 1942 Gibson lg-2 Banner Mess

Post by AluminumTop »

Thanks Diane,
This is an inspiration and an idea for my soundboards on top of others bodies (from MIRC stocks).
jread
Posts: 560
Joined: Wed Feb 13, 2019 9:52 am
Contact:

Re: 1942 Gibson lg-2 Banner Mess

Post by jread »

thanks again for posting this. I'm going to try the aluminum bars on a '58 LG-0 that has some crumpling going on at the sound hole. And a decent belly too.
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: 1942 Gibson lg-2 Banner Mess

Post by Diane Kauffmds »

The aluminum plates were magical! They corrected that top in no time flat. I just got an email from the Gibson owner a couple of days ago. He just loves playing this old Banner. He plays it daily.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Post Reply