drastic restoration
-
Danl8
- Posts: 740
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: drastic restoration
Nice work, John. Any pictures of the end mill set up?
-
tippie53
- Posts: 7118
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: drastic restoration
0829 image a few post back will show that set up. I am in my mill drill and mill vise the end mill was used to recut the original drill hole. This allows me a larger plug with more glue surface are.
that is the end mill in the milling machine
you can do this in a drill press but be sure you are clamped well
that is the end mill in the milling machine
you can do this in a drill press but be sure you are clamped well
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
Mike Baker
- Posts: 15
- Joined: Mon Jul 02, 2018 12:21 pm
Re: drastic restoration
Attaboy! 