Martin's off-center neck profile
-
- Posts: 7020
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Martin's off-center neck profile
with the influx of new employees and the fact the necks are hand sanded there is always the chance of a neck that isn't perfect to the patterns
I will check with my other contacts to see if they are doing this
I will check with my other contacts to see if they are doing this
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 7020
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Martin's off-center neck profile
Yes Martin did some off symitrical necks starting on the OM authentic and they are putting some out
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 360
- Joined: Wed Jul 29, 2015 9:04 pm
- Location: San Jose, CA, USA
Re: Martin's off-center neck profile
When I toured the plant just before the COVID lockdown they were carving necks on a 5-axis Onsrud CNC. Do they still do additional handwork/sanding after the neck comes out of the CNC?
You do not have the required permissions to view the files attached to this post.
Last edited by rcnewcomb on Tue Jun 07, 2022 8:02 pm, edited 1 time in total.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
10 fingers in, 10 fingers out - another good day in the shop
-
- Posts: 567
- Joined: Wed Feb 13, 2019 9:52 am
- Contact:
Re: Martin's off-center neck profile
This was 5/31/2019. They were doing more than sanding them in the neck shop. I highly recommend the factory tour. I was blown away the skill and experience it takes to build their guitars. Sure, there's machines in the factory but you can't leave that tour without agreeing that Martins are "hand made." I'd give a lot to be let loose in there for a few weeks!
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3257
- Joined: Sun Mar 09, 2014 8:13 pm
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Martin's off-center neck profile
Acoustic Letter posted a video yesterday reviewing a new 000-42 with the asymmetrical neck. https://www.youtube.com/watch?v=PV_KcnRHBbY
-
- Posts: 7020
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Martin's off-center neck profile
yes they are going to do more
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 3257
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Martin's off-center neck profile
I can see why. They're more comfortable to play.