Page 1 of 1
D-45 abalone width
Posted: Sun May 03, 2015 3:36 pm
by Ben-Had
On a D-45 is the abalone 1.5 or 3 mm wide?
Re: D-45 abalone width
Posted: Mon May 04, 2015 6:37 am
by tippie53
actually
top pearl is .0625 ( 1/16 in )
the side and back pearl is .049 in
you can order this though Dave Nichols he also will have the poly strips for it.
518-483-7685
Re: D-45 abalone width
Posted: Mon May 04, 2015 9:39 am
by Ben-Had
Thanks John.
Re: D-45 abalone width
Posted: Mon May 04, 2015 7:36 pm
by tippie53
another point you place the sound hole about 6 1/8 in as the wider rosette needs to be lower to get the pearl to match up on the extension and rosette.
Re: D-45 abalone width
Posted: Mon May 04, 2015 9:50 pm
by MaineGeezer
Note: 1.5mm = 0.059"
3mm = 0.118"