Page 1 of 1
Final Pore Fill on # 3 and #4
Posted: Sat Dec 14, 2013 12:48 pm
by glasalle1
Third application of Z-poxy on my Numbers 3 and 4 guitars. I am following Todd Stocks Youtube video schedule, and working well. First guitar is the OM w/ African Mahogany Zebrawood trim/bindings/radial rosette and Lutz top. Second is Prairie State Jumbo Madagascar Rosewood with Curly Koa bindings/trim and Bearclaw Sitka top. I can honestly say, pore filling is NOT my favorite task :-)
Glenn
IMG_2608.jpg
Re: Final Pore Fill on # 3 and #4
Posted: Sat Dec 14, 2013 3:37 pm
by johnnparchem
They sure look good!
Re: Final Pore Fill on # 3 and #4
Posted: Sun Dec 15, 2013 1:23 am
by Kevin Sjostrand
Beauties from where I'm sitting.
Re: Final Pore Fill on # 3 and #4
Posted: Sun Dec 15, 2013 9:40 am
by glasalle1
Thanks guys. What I find interesting is the Z-poxy flows really nicely over the African Mahogany (3rd guitar built with African Mahogany, and using z-poxy), but was more difficult to apply to the Madagascar Rosewood. It just didn't flow nearly as nice wrt coverage. Not sure if the oils/resin in the rosewood affects this, but interesting none the less.
Glenn
Re: Final Pore Fill on # 3 and #4
Posted: Mon Dec 16, 2013 7:20 am
by justrfb
Very nice!... Looking forward to seeing more pictures of your progress.
Sincerely,
Rich