I just sanded a set of sides at a local cabinet shop. Due to a miscommunication they came out .068-.069 thick. Would you use them or turn them into stock for head plates? They are rosewood.
Tim Hurley
side thickness
-
Tmh
- Posts: 6
- Joined: Mon Aug 13, 2012 9:45 pm
- Location: northern minnesota
-
tippie53
- Posts: 7141
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: side thickness
that is actually usable
Old martin stuff was done to .065
Old martin stuff was done to .065
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
Tmh
- Posts: 6
- Joined: Mon Aug 13, 2012 9:45 pm
- Location: northern minnesota
Re: side thickness
John
Thank you for the quick reply. I thin I will give them a try.
Tim
Thank you for the quick reply. I thin I will give them a try.
Tim