Shell inlay questions
Posted: Tue Apr 02, 2013 7:33 pm
I'm thinking about using some Abalone in my current build and I have a few questions.
After everything is in and sanded level for finish what happens to the shell. I would typically sand to 180 or 220 for the first coats.
I didn't test it but I'm thinking that will scuff up the shell pretty good, will the finish coats bring it back to life.
Sorry if this is a dumb question, I never worked with shell before.
SA
After everything is in and sanded level for finish what happens to the shell. I would typically sand to 180 or 220 for the first coats.
I didn't test it but I'm thinking that will scuff up the shell pretty good, will the finish coats bring it back to life.
Sorry if this is a dumb question, I never worked with shell before.
SA