Can you tell me what the thickness measurements Martin uses
on the new 2012 D-18? The top, back and sides.
I hope John will chime in on this one.....Thanks in advance.
Martin thickness for top, back and sides?
-
Legolas
- Posts: 62
- Joined: Thu Oct 04, 2012 1:43 pm
-
tippie53
- Posts: 7127
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Martin thickness for top, back and sides?
top on pre war .117
sides .075
back .110
there will be variation from the hand sanding process but this will be close.
sides .075
back .110
there will be variation from the hand sanding process but this will be close.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
Legolas
- Posts: 62
- Joined: Thu Oct 04, 2012 1:43 pm
Re: Martin thickness for top, back and sides?
Thank you John!tippie53 wrote:top on pre war .117
sides .075
back .110
there will be variation from the hand sanding process but this will be close.