www.KitGuitarsForum.com

Posted: **Tue Sep 25, 2012 4:09 pm**

Somewhere on this forum or another, there is a procedure for drilling and positioning location pins in the neck blank and fretboard to facilitate the removal and re positioning of the fretboard until such a time as its glued in situ. The martin kits come with these installed.

Does anyone have a link to it ?

John

Posted: **Tue Sep 25, 2012 4:24 pm**

Board index » Learning Tutorials » John Hall's Quick Tip Videos

-tommy

Posted: **Tue Sep 25, 2012 8:16 pm**

Easy fix
Set the fretboard on the neck and tape securely drill 2 small holes on the fret board at a fret slot. Use a brad nail to work as a register pin. Nip so they are under the fret tang.

www.KitGuitarsForum.com

Pins for locating neck blank on the neck

Pins for locating neck blank on the neck

Re: Pins for locating neck blank on the neck

Re: Pins for locating neck blank on the neck