Removing set neck.I did use Hide glue when I assembled it

What're You Doing?
Post Reply
LeftyAl
Posts: 17
Joined: Sun Jun 28, 2015 7:00 pm

Re: Removing set neck.I did use Hide glue when I assembled i

Post by LeftyAl »

Thanks again. I glued bowels in the holes where the bridge and tail piece studs were placed.I then made new marks where I wanted to drill the new holes.It came out prefect. I probably moved the holes 1/8" ,but it made all the difference.Thanks for that big tip.I made a tough job much easier.
Top
tippie53
Posts: 7140
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:
Contact tippie53

Re: Removing set neck.I did use Hide glue when I assembled i

Post by tippie53 »

super
glad it all worked out for you
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Top
Post Reply

Return to “Guitar Building Procedures”