open questions for you builders

What're You Doing?
Post Reply
thronson
Posts: 85
Joined: Tue Jul 01, 2014 6:37 pm
Location: Napa, CA

Re: open questions for you builders

Post by thronson »

Have not seen the final geometry sanding of the top rim once the kerfing is glued in place. Has that video been posted ?? Thronson
Top
tippie53
Posts: 7140
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:
Contact tippie53

Re: open questions for you builders

Post by tippie53 »

Let me know if this is what you were looking for. This is what I do just before I glue on the plates

John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Top
Monkmusic
Posts: 15
Joined: Mon Nov 18, 2013 8:28 pm
Location: York Maine USA
Contact:
Contact Monkmusic

Re: open questions for you builders

Post by Monkmusic »

John, I'd also like a few tips on pore filling when you have a chance. It's been one of the harder things for me to get the hang of. TIA

Jeff
Top
tippie53
Posts: 7140
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:
Contact tippie53

Re: open questions for you builders

Post by tippie53 »

that is on the menu for video.
next batch I hope
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Top
thronson
Posts: 85
Joined: Tue Jul 01, 2014 6:37 pm
Location: Napa, CA

Re: open questions for you builders

Post by thronson »

Yes ... that's the one ... Prepping the rims to glue ... just what i was looking for ... thanks , Thronson

I must have gotten it confused with Preparing the rims, and skipped over it ... my mistake ...
Top
Post Reply

Return to “Guitar Building Procedures”