Jumbo & OM, getting the bridges on
Posted: Fri Sep 05, 2014 2:07 pm
Almost at the end wrt the 2 guitars I am building! First is the Jumbo based on a Prairie State guitar (17.25" lower bout), Mad Rw B&S, Bearclaw sitka top, and trimmed in Curly koa, spalted maple. I glued the bridge on the other day - just have some glue squeeze-out I need to clean up. The 2nd guitar is an Afr Hog OM with Lutz top trimmed in Zebrawood. This guitar is measured for the bridge - just need to scrape away the finish and glue on the bridge.
Glenn
Glenn