Almost at the end wrt the 2 guitars I am building! First is the Jumbo based on a Prairie State guitar (17.25" lower bout), Mad Rw B&S, Bearclaw sitka top, and trimmed in Curly koa, spalted maple. I glued the bridge on the other day - just have some glue squeeze-out I need to clean up. The 2nd guitar is an Afr Hog OM with Lutz top trimmed in Zebrawood. This guitar is measured for the bridge - just need to scrape away the finish and glue on the bridge.
Glenn
Jumbo & OM, getting the bridges on
-
glasalle1
- Posts: 190
- Joined: Sun Aug 22, 2010 5:02 pm
Jumbo & OM, getting the bridges on
You do not have the required permissions to view the files attached to this post.
-
tippie53
- Posts: 7118
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Jumbo & OM, getting the bridges on
all right
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com