Another supplier for you: https://www.mcmaster.com/
Not necessarily the cheapest, but their range of products is mind-boggling.
Router Bit Size
-
MaineGeezer
- Posts: 1717
- Joined: Wed Aug 13, 2014 12:14 pm
Re: Router Bit Size
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
scamp
- Posts: 228
- Joined: Sat Mar 26, 2022 8:19 pm
Re: Router Bit Size
Well I got my 1/16 inch router bit in the mail today and used it to cut out and install an experimental rosette with my home made black turquoise black purfling, It worked remarkably well. Some pictures below. Thanks for all the suggestions.
Here is the rosette with the purfling ( after bending it on my bending iron and install )
Here is the rosette with the purfling ( after bending it on my bending iron and install )
You do not have the required permissions to view the files attached to this post.
-
Stray Feathers
- Posts: 685
- Joined: Sun Sep 08, 2013 11:39 pm
- Location: Ladysmith, BC
Re: Router Bit Size
Nicely done! Bruce W.