Guitar kit came with cloth side support strips.
Not sure proper technique to glue these in place.
I assume Titebond glue will probably work but not sure.
Also, are they somehow clamped in place while gluing?
Any suggestions how best to apply them welcome
Thanks
Cloth Side Supports
-
- Posts: 223
- Joined: Sat Mar 26, 2022 8:19 pm
-
- Posts: 561
- Joined: Wed Feb 13, 2019 9:52 am
- Contact:
Re: Cloth Side Supports
I wipe tightbond on the back and just place them on. I put them on 1st so they tuck under the kerfing. Wipe with a damp cloth to flatten and clean the glue. They don’t fall off. Try on scrap if u need some confirmation.