Binding Method for Beginner
-
- Posts: 44
- Joined: Thu Dec 02, 2021 11:07 pm
Re: Binding Method for Beginner
Bill Cory included a couple of pictures of his design in his Martin Guitar Kit book, but the link does not work. His design was basically a small guide that bolted to the baseplate of the router, extending under the bit. His approach requires the bearing-style cutting bit, and his guide provided further stability as it rode along the side of the guitar. He also used 3 popsicle sticks taped to the baseplate just in front of the bit, which rode on the top of the guitar.
The cheapest approach, short of using a hand-held grammel, is making a KMG-style guide. It only requires a 1/4" down spiral cutting bit and a couple pieces of scrap wood. I also downloaded plans from Bogdanovich's website for ~$10 and am going to attempt to build his jig. It is similar to both the KMG and Cory approaches, in that it has a moveable guide that rides along the side of guitar, adjustable for depth. Where it differs is that it also has a handle, so that you hold it by the jig and press against the side of the guitar instead of holding it from above and hoping you are parallel to the side. It makes lots of sense, but I haven't made it yet. Plans here: https://www.jsbguitars.com/shop/guitar- ... ent-plans/
The cheapest approach, short of using a hand-held grammel, is making a KMG-style guide. It only requires a 1/4" down spiral cutting bit and a couple pieces of scrap wood. I also downloaded plans from Bogdanovich's website for ~$10 and am going to attempt to build his jig. It is similar to both the KMG and Cory approaches, in that it has a moveable guide that rides along the side of guitar, adjustable for depth. Where it differs is that it also has a handle, so that you hold it by the jig and press against the side of the guitar instead of holding it from above and hoping you are parallel to the side. It makes lots of sense, but I haven't made it yet. Plans here: https://www.jsbguitars.com/shop/guitar- ... ent-plans/
Last edited by Slowpicker on Tue Mar 08, 2022 2:07 pm, edited 1 time in total.
-
- Posts: 19
- Joined: Thu Feb 24, 2022 1:09 pm
Re: Binding Method for Beginner
Thank you!!! I purchased/downloaded the Bogdanovich plans and, gulp, I think I may be able to build it.
Gratefully,
Scot
Gratefully,
Scot
-
- Posts: 3727
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: Binding Method for Beginner
SCOT
I have the Bill Cory guide made by him. You can have it for the price of shipping it.
I used it on my first 3 guitars and it works just fine.
Attaches to a trim router.
If you want it I'll dig it out tomorrow and make sure it's where I think it is. It's been about 10 years!
Kevin
I have the Bill Cory guide made by him. You can have it for the price of shipping it.
I used it on my first 3 guitars and it works just fine.
Attaches to a trim router.
If you want it I'll dig it out tomorrow and make sure it's where I think it is. It's been about 10 years!
Kevin
-
- Posts: 44
- Joined: Thu Dec 02, 2021 11:07 pm
Re: Binding Method for Beginner
If Scot is not interested, I would love to try it. I plan to build the Bogdanovich jig, but haven't yet made that a reality.
-
- Posts: 19
- Joined: Thu Feb 24, 2022 1:09 pm
Re: Binding Method for Beginner
Slowpicker,
My apologies, but I let Kevin know this morning that I want his Bill cory router guide. Though I have the Bogdanovich plans know, it would be a reach for me to build that one with my limited equipment and limited woodworking know-how. So, the router guide from Kevin was/is the straightest path for me to get through my first, and perhaps only, guitar build.
The support from folks on this forum, and from John Hall at Blues creek guitars, is amazing.
My apologies, but I let Kevin know this morning that I want his Bill cory router guide. Though I have the Bogdanovich plans know, it would be a reach for me to build that one with my limited equipment and limited woodworking know-how. So, the router guide from Kevin was/is the straightest path for me to get through my first, and perhaps only, guitar build.
The support from folks on this forum, and from John Hall at Blues creek guitars, is amazing.
-
- Posts: 44
- Joined: Thu Dec 02, 2021 11:07 pm
Re: Binding Method for Beginner
Glad to hear it, Scott. I'll post pics of my attempt at making the Bogdanovich jig before too long.
-
- Posts: 3727
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: Binding Method for Beginner
By the way. Bill Cory developed some issues with his hands a few years ago and had to stop building guitars. I spoke with him last a couple of years ago and he was then also having trouble playing guitar. He was a great help to me when I first started out 14 years ago with a kit.
Many builders got started using his first book and materials, and coming here. This forum was his baby.
He sold off all his guitar making stuff and if I remember correctly he was considering moving out of country.
John has done great thing with this forum and is such a help and great source of experience and encouragement.
Scot. I hope that jig works out for you. Be SURE to practice cutting on the edge of board before taking your router to a guitar. It takes a little practice. I still do that every time I set up my routing set up for a guitar. I like using MDF for trial runs.
Good luck.
Many builders got started using his first book and materials, and coming here. This forum was his baby.
He sold off all his guitar making stuff and if I remember correctly he was considering moving out of country.
John has done great thing with this forum and is such a help and great source of experience and encouragement.
Scot. I hope that jig works out for you. Be SURE to practice cutting on the edge of board before taking your router to a guitar. It takes a little practice. I still do that every time I set up my routing set up for a guitar. I like using MDF for trial runs.
Good luck.
-
- Posts: 173
- Joined: Tue Jan 17, 2012 12:38 am
- Location: Seattle
Re: Binding Method for Beginner
Good idea to practice a few times. Also get the guitar held down firmly, one might think they don't need to using a router but things can get way from you before you can react.
Bruce,
Bruce,
-
- Posts: 1715
- Joined: Wed Aug 13, 2014 12:14 pm
Re: Binding Method for Beginner
You must realize that nobody builds just one guitar..... :-)My current intention is to build one kit (Martin 000) and be done, ...
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
- Posts: 3727
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: Binding Method for Beginner
Ain't that the truth. I'm on #16 but it's taken 14 years to get there.