www.KitGuitarsForum.com

My first guitar will be a 000 Martin kit from Blues Creek Guitar. What size disks will I need for this? I assume I'll need one for the top and a different one for the back. I plan on using a go-bar deck, if that matters.

Thanks,
Ed

28 for the top, 18 for the back, I think, but get confirmation from Blued Creek.

yupper
here is a link to how to use them. The key is that the top is not totally radiused . We use it to create that 1 1/2 degree neck angle . here are 2 links to watch that may help

https://www.youtube.com/watch?v=LrgRKKsxL-M

https://www.youtube.com/watch?v=pz6xzVRA51E

the back is totally radiused. Hope this info helps

Thanks John. I've watched those videos a couple of times and will watch them a few more times I'm sure.

Ed

I agree that it would be the best if you take 28 for the top, 18 for the back. But if possible, you should go check this again

tippie53 wrote:yupper
here is a link to how to use them. The key is that the top is not totally radiused . We use it to create that 1 1/2 degree neck angle . here are 2 links to watch that may help

https://www.youtube.com/watch?v=LrgRKKsxL-M

https://www.youtube.com/watch?v=pz6xzVRA51E

the back is totally radiused. Hope this info helps

So John you do not carry the 18' disks, is that correct? They aren't available in the drop-down menu when I go to order the disks.

Ed

mnmusic wrote:My first guitar will be a 000 Martin kit from Blues Creek Guitar. What size disks will I need for this? I assume I'll need one for the top and a different one for the back. I plan on using a go-bar deck, if that matters.

Thanks,
Ed

You'll want a 28' disk and a 15' disk. Not an 18' disk.

tommyboy wrote:

mnmusic wrote:My first guitar will be a 000 Martin kit from Blues Creek Guitar. What size disks will I need for this? I assume I'll need one for the top and a different one for the back. I plan on using a go-bar deck, if that matters.

Thanks,
Ed

You'll want a 28' disk and a 15' disk. Not an 18' disk.

Thank you very much!

Ed

I got my disks and sandpaper from John today. I was wondering if I should seal the disks with a coat or two of shellac or varnish to keep them in good shape?

Ed

yes that is a great idea