Shimming under/beside the nut?

Questions and answers for beginners. If you have a question, so do most other people.
Post Reply
tippie53
Posts: 7027
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:
Contact tippie53

Re: Shimming under/beside the nut?

Post by tippie53 »

I have to disagree with the CA . The CA will slow into the pores of the Mahogany , and seal them. They will stand out in the finish process. Wood glue should be fine. That won't seal the pores . I learned this the hard way.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Top
Kevin Sjostrand
Posts: 3754
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: Shimming under/beside the nut?

Post by Kevin Sjostrand »

yes of course John, you are right. I was only thinking of the rosewood, but if it gets onto the hog not good.

Kevin
Top
tippie53
Posts: 7027
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:
Contact tippie53

Re: Shimming under/beside the nut?

Post by tippie53 »

We should post a list of CA compatible woods I will run this by Tommy We can set up a reference section
Whacha all think ???
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Top
Kevin Sjostrand
Posts: 3754
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: Shimming under/beside the nut?

Post by Kevin Sjostrand »

Yep, good idea
Top
Post Reply

Return to “Beginners' Questions”