Building a Fox bending machine

Storebought or Homemade: Tell Us!
Bob Gleason
Posts: 412
Joined: Fri Jul 03, 2015 2:45 pm
Contact:

Re: Building a Fox bending machine

Post by Bob Gleason »

I'm sure John sells the right springs for most guitar work, and buying from him is the easy way to get the right ones. I bend everything from Soprano ukes to jumbo guitars in the same bender, so I have a lot of different size springs. Ace Hardware here has a complete stock, and so does Home Depot. Springs should be fairly easy to find locally in any urban area.-Bob
MaineGeezer
Posts: 1711
Joined: Wed Aug 13, 2014 12:14 pm

Re: Building a Fox bending machine

Post by MaineGeezer »

http://www/mcmaster.com has just about any spring you can imagine.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Post Reply