I hope this is going to turn into a 9" wide thickness sander
-
MaineGeezer
- Posts: 1715
- Joined: Wed Aug 13, 2014 12:14 pm
Re: I hope this is going to turn into a 9" wide thickness sander
No, you're not. If I had a 18" wide thickness sander, I'd glue the halves together first. That's the way one ought to do it. But with a 9" wide sander, I sand each half then make sure they're aligned really well when gluing. It's not ideal, but it's do-able.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
-
carld05
- Posts: 170
- Joined: Mon Mar 19, 2012 4:19 pm
- Location: Forest Ranch, CA
Re: I hope this is going to turn into a 9" wide thickness sander
That's why there can be an advantage to the open ended sanders. Sand each half (with an overlap) when it's glued together. Model names, 10-20, 16-32, 22-44, etc.