Page 4 of 4
Re: 14" Taiwanese band saw $279 new
Posted: Mon May 09, 2011 3:39 pm
by deadedith
Tony - how many more loads? Let's just say - you are going to get filthy rich, you lucky guy..
DaveB
Re: 14" Taiwanese band saw $279 new
Posted: Mon May 09, 2011 3:40 pm
by kencierp
Yep -- I've had lenghty posts evaporate many times! I try and remember to copy the text before clicking any button --- I have emailed Sean -- this is truly a PITA
Re: 14" Taiwanese band saw $279 new
Posted: Tue May 10, 2011 7:52 pm
by deadedith
Job one with new 12" - could it cut a circle? Using a piece of scrap, my first attempt - success. i still have to thickness it a bit, but the tolerances are good and I trust the process now. To smooth out the routed slot I cut a piece of 4" pvc and used it to support some 60 grit on the outside and the inside.
Re: 14" Taiwanese band saw $279 new
Posted: Tue May 10, 2011 7:56 pm
by deadedith
And for those of you who have never seen a band saw before...well, that's nobody at all, I guess..two needless pix of said 12" bandsaw.
Re: 14" Taiwanese band saw $279 new
Posted: Wed May 11, 2011 12:17 am
by David L
I have also had posts disappear when I hit the submit button and what I've noticed when that happens is that there is a brand new unread post from someone else, it's like two poeple hitting the submit button at the same time but only one gets accepted, not sure if that's the case but it sure seems like it.
David L