Brand?

Storebought or Homemade: Tell Us!
Post Reply
Slowpicker
Posts: 44
Joined: Thu Dec 02, 2021 11:07 pm

Brand?

Post by Slowpicker »

Anyone know where to get a custom brand made to burn my name into the back strip like early Martins or Wayne Henderson? Seems easier and classier than a sticker covering the wood through the soundhole.
Stray Feathers
Posts: 677
Joined: Sun Sep 08, 2013 11:39 pm
Location: Ladysmith, BC

Re: Brand?

Post by Stray Feathers »

I looked around a lot but there were few options for Canadian customers without expensive shipping and brokerage. I found one at Lee Valley Tools which was pretty simple, but it looks like they don't list it any more. It works fine but it is a little tricky to get it lined up square, and to get it even on the slightly rounded surface of the back strip. I am now doing the brand on the back strip (or a small piece of back strip) before I glue it in. And it is almost too big for ukuleles, but you could put it directly on the back, or the neck block. Here is a link to one source I found, and there are others if you look, some quite elegant looking (like Wayne Henderson's):

https://www.brandnew.net
You do not have the required permissions to view the files attached to this post.
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Brand?

Post by Diane Kauffmds »

There are a ton of them on Etsy.com.

Here is one of many. Just search "custom wood branding iron" in the site. Also, in the filter, you can specify the shop location; by default it's set on "anywhere". There's a place to check united States. But you can put a custom location, like Canada.

They come in a variety of shapes and sizes, so scroll through shop photos. I've thought of doing something similar on the neck block.

https://www.etsy.com/listing/957707076/ ... ctric-wood
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
TEETERFAN
Posts: 342
Joined: Fri Sep 07, 2018 12:43 pm
Location: Kansas City, MO

Re: Brand?

Post by TEETERFAN »

I got one on Ebay. Seller was in China, so it took about a month to receive. Solid, machined brass. 4cm X 4cm. This is just for the actual stamp and screw/threaded hole to attach it to a handle or iron of your choice.



https://www.ebay.com/itm/225058232728?m ... edia=EMAIL
You do not have the required permissions to view the files attached to this post.
Kevin Doty
Kansas City
Skarsaune
Posts: 239
Joined: Mon Dec 03, 2018 9:12 am

Re: Brand?

Post by Skarsaune »

Used my CNC to make my own.
8A985F34-37F8-46F3-A115-436036EFE6B6.jpeg
5A627D60-E1DC-4683-ACE8-06C21F41B580.jpeg
The infinity circle is my guitar logo, the dog is for other woodwork I do.
You do not have the required permissions to view the files attached to this post.
Post Reply