Greetings,
Spurred on by a friend in need, I made two ukes this year copied from my World War I vintage Martin style 1 soprano uke. The first finished this week is mahogany B&S and alpine spruce top with rosewood fb and african mahog neck. Bindings are jacaranda de bahia, Bridge is firewood (got it before spouse burned it) and pegs are from the plum tree I cut down in the front yard. Some Paua abalone is used for decoration.
-d.
Cloned my 1918 Martin Uke
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Cloned my 1918 Martin Uke
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: Cloned my 1918 Martin Uke
Dan
Did you have or draw plans? My daughter plays a Wurlitzer/Martin and I have been thinking of copying it in all-Osage Orange with ebony fretboard and bridge.
Ed
Did you have or draw plans? My daughter plays a Wurlitzer/Martin and I have been thinking of copying it in all-Osage Orange with ebony fretboard and bridge.
Ed
Ed M
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Cloned my 1918 Martin Uke
Hi Ed,
I just traced my old uke. Took the strings/pegs off, etc., and measured everything. BTW, the old one isn't perfectly symmetrical. I started the project thinking it would be half the effort of a guitar, but it ended up taking as much time, though it was fun. (Pic of the Martin below)
-d.
I just traced my old uke. Took the strings/pegs off, etc., and measured everything. BTW, the old one isn't perfectly symmetrical. I started the project thinking it would be half the effort of a guitar, but it ended up taking as much time, though it was fun. (Pic of the Martin below)
-d.
You do not have the required permissions to view the files attached to this post.
Re: Cloned my 1918 Martin Uke
Dan,
The instrument accompanying the uke in your photo looks interesting. Would you give us some info as to what it is? Did you build it?
-tommy
The instrument accompanying the uke in your photo looks interesting. Would you give us some info as to what it is? Did you build it?
-tommy
-
- Posts: 1564
- Joined: Thu May 24, 2012 8:03 am
- Location: Chestertown Maryland
Re: Cloned my 1918 Martin Uke
Thanks Dan
I will do he same to the Wurlitzer. Lovely lute-like object there.
Ed
I will do he same to the Wurlitzer. Lovely lute-like object there.
Ed
Ed M
-
- Posts: 733
- Joined: Mon Jul 28, 2014 7:50 am
- Location: Chadds Ford, PA
Re: Cloned my 1918 Martin Uke
Hi Tommy,
That tiny lute is a copy that I made in the 1980's from the original octave lute C.41 by Venere(?) in the Vienna Kunsthistorisches Museum. The original was in shaded yew (heart-sap wood), so this one is too. If I recall correctly the original is part of a four instrument suite of matching lutes ranging from soprano to bass in size. I had planned make the other three as well. (...only if I live long enough...) The top wood was an exceptional piece of tone wood, but too small for anything so I got it for free. The yew came from a donor bush in the yard. The bridge is boxwood and the neck/box is (?? don't remember--just checked it was beech). As you can see in the pictures below the chantarelle/first string needs to be replaced and I didn't finish carving the rose or the pegs -- maybe this year. :-)
-Dan
That tiny lute is a copy that I made in the 1980's from the original octave lute C.41 by Venere(?) in the Vienna Kunsthistorisches Museum. The original was in shaded yew (heart-sap wood), so this one is too. If I recall correctly the original is part of a four instrument suite of matching lutes ranging from soprano to bass in size. I had planned make the other three as well. (...only if I live long enough...) The top wood was an exceptional piece of tone wood, but too small for anything so I got it for free. The yew came from a donor bush in the yard. The bridge is boxwood and the neck/box is (?? don't remember--just checked it was beech). As you can see in the pictures below the chantarelle/first string needs to be replaced and I didn't finish carving the rose or the pegs -- maybe this year. :-)
-Dan
You do not have the required permissions to view the files attached to this post.