Dreadnought plans questions

TEETERFAN
Posts: 371
Joined: Fri Sep 07, 2018 12:43 pm
Location: Kansas City, MO

Re: Dreadnought plans questions

Post by TEETERFAN »

I basically followed only the deflection testing part of this article:

https://www.portlandguitar.com/blogs/fe ... ng-science

I emailed Max and he confirmed my target specs:

2 degrees bridge rotation with a 1 3/8” drop, compared to the unweighted measurements. Weight and outboard distance= (5lbs@24”)

Again, these results were obtained using exact Martin D28 1937 dimensions (John Arnold’s drawing), with no changes whatsoever. Perhaps I lucked out, but regardless I would feel comfortable eliminating the testing on future instruments.
You do not have the required permissions to view the files attached to this post.
Kevin Doty
Kansas City
jread
Posts: 586
Joined: Wed Feb 13, 2019 9:52 am
Contact:

Re: Dreadnought plans questions

Post by jread »

I don’t like the look of a cutaway but I’ve done few. My 1st two i bent by hand over a bending iron. They are tricky to get the curve right but I’ve not broken any sides yet.

After those I got John’s bending machine and they are as easy to bend as without.

Some players love those frets and want access to them so I’ll do the cutaway if that’s what they want. My buddy in the photo travels the world playing this build on stage.

Note in the photo the block is in backwards. Not glued in just a caul at this point.
You do not have the required permissions to view the files attached to this post.
Morecowbell
Posts: 284
Joined: Thu Feb 21, 2019 10:51 am
Location: Fishers, IN

Re: Dreadnought plans questions

Post by Morecowbell »

I find the whole idea of quantifying the sound of a guitar intriguing. Experienced builders seem to figure it out over time by feel and trial and error, but when I see the approach of someone like Trevor Gore it appeals to that part of me that would like to have some guidelines and maybe shorten the learning curve.

As I braced the top and back I did some recordings (in audacity) of tap tones to see if I could learn anything, and I didn't get very far! Deflection testing seems simpler and easier to grasp. I've been thinking about the Trevor Gore books but price and sheer volume of information have held me off, and then I bumped into Left Brain Lutherie (David Hurd) and have that on the way from Slowpicker. Seems to be something of a precursor, looking forward to what it has to offer.
"Facts seldom sway an opinion." - John Hall
"The difference between theory and practice is that in theory there is no difference." - Van de Snepscheut
Morecowbell
Posts: 284
Joined: Thu Feb 21, 2019 10:51 am
Location: Fishers, IN

Re: Dreadnought plans questions

Post by Morecowbell »

John H -

Probably a stupid questions but what do you use as a tuner for your tops & backs? I wouldn't think a regular guitar tuner would be sensitive enough to pick up the pitch, or is it?

Thanks!

Clay

P.S. Started reading "Left Brain Lutherie", the author is not someone you would want to sit next to on a plane :-)
"Facts seldom sway an opinion." - John Hall
"The difference between theory and practice is that in theory there is no difference." - Van de Snepscheut
tippie53
Posts: 7075
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Dreadnought plans questions

Post by tippie53 »

snark tuners at the sound hole
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
JLT
Posts: 304
Joined: Wed Nov 02, 2011 9:13 pm
Location: Sacramento, CA USA

Re: Dreadnought plans questions

Post by JLT »

tippie53 wrote: Thu Oct 06, 2022 9:35 am snark tuners at the sound hole
Any videos showing how this is done? Or is this video in the making?
AluminumTop
Posts: 44
Joined: Mon Nov 30, 2020 1:42 pm
Contact:

Re: Dreadnought plans questions

Post by AluminumTop »

Thank You, Interesting method of tuning...
Post Reply