Accurate 000/OM Plans Available for Purchase Online?

Airplanenuts
Posts: 11
Joined: Sat Mar 19, 2022 9:09 pm

Re: Accurate 000/OM Plans Available for Purchase Online?

Post by Airplanenuts »

That's great advice, MaineGeezer. Thank you kindly.

I could make templates quick 'n dirty using the contour gauge and light 1/8" plywood at three or so stations along my neck, and use them while carving. The billet is $100, so I won't be getting in a hurry to finish the carve.

If I had better sense, I'd model the neck in 3D and have it carved with a CNC, but, I don't, so I won't.

Rich
Go Army!
MaineGeezer
Posts: 1711
Joined: Wed Aug 13, 2014 12:14 pm

Re: Accurate 000/OM Plans Available for Purchase Online?

Post by MaineGeezer »

This guy https://www.kappi.com/blog/setups/ has plans for a neck routing fixture that doesn't look too difficult to make. It's designed for electric guitar necks though (i.e. basically flat boards with no heel) and adapting it to work with acoustic necks might be a problem.
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Airplanenuts
Posts: 11
Joined: Sat Mar 19, 2022 9:09 pm

Re: Accurate 000/OM Plans Available for Purchase Online?

Post by Airplanenuts »

That is very interesting. I'd settle for a dovetail jig to duplicate Martin's joint.

Rich
Go Army!
Airplanenuts
Posts: 11
Joined: Sat Mar 19, 2022 9:09 pm

Re: Accurate 000/OM Plans Available for Purchase Online?

Post by Airplanenuts »

I'm making my own plans, as Diane suggested. I just don't trust what I'm finding on the interwebs. I've yet to find a flat scan or photo of a tracing or portrait, so I may have to do some interpolation.

A thank-you to John Hall. I've spent my morning trying to order, by piece, a pre-War rosette for this new build. I stumbled on a thread on UMGF stating that John sells one. I wish I'd looked on his site first! If anyone else reading this is looking for one: https://bluescreekguitars.com/product/1 ... 8-rosette/

He also has pre-bent herringbone purfling and the zig-zag backstrip.

Rich
Go Army!
jread
Posts: 560
Joined: Wed Feb 13, 2019 9:52 am
Contact:

Re: Accurate 000/OM Plans Available for Purchase Online?

Post by jread »

Airplanenuts wrote: Sun Jul 03, 2022 11:29 am A thank-you to John Hall. I've spent my morning trying to order, by piece, a pre-War rosette for this new build. I stumbled on a thread on UMGF stating that John sells one. I wish I'd looked on his site first! If anyone else reading this is looking for one: https://bluescreekguitars.com/product/1 ... 8-rosette/

He also has pre-bent herringbone purfling and the zig-zag backstrip.
I spent a lot of time looking for these strips as well. The big suppliers have some but they are a bit $$ especially if you want the celluloid strips in the center as you get $30 hazmat shipping charges. I tend to make my own wooden rosettes now but used the John's vintage 28 rosette on my last build. This has his herringbone and back strip as well.
I still use my stewmac Soundhole and Rosette Routing Jig for the dremel as it works just fine but have always wanted to upgrade to a circle cutter that will hold my rigid router.
You do not have the required permissions to view the files attached to this post.
carld05
Posts: 170
Joined: Mon Mar 19, 2012 4:19 pm
Location: Forest Ranch, CA

Re: Accurate 000/OM Plans Available for Purchase Online?

Post by carld05 »

I got this jig that fits a Ridgid router, but adapted it to a Dewalt 20V. Worked good for a decent price. A little fiddly to adjust at first. Rosettes fit great! https://www.jsbguitars.com/shop/guitar- ... ttachment/
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Accurate 000/OM Plans Available for Purchase Online?

Post by Diane Kauffmds »

carld05 wrote: Mon Jul 04, 2022 12:20 pm I got this jig that fits a Ridgid router, but adapted it to a Dewalt 20V. Worked good for a decent price. A little fiddly to adjust at first.
I've had the same jig for years. It works well enough. I'm using a Milescraft small circle cutter. I find it to be more accurate, but it takes longer to set up.

Milescraft 1210 Small Circle Compass- Router Circle Cutter Jig For Cutting & Routing Small Circles From 1.5in. Up To 12in. Diameter- Includes Turn Lock Base Plate -Compatible With Most Routers https://a.co/d/fHup4KX
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Post Reply