HD-35 Braces

Talk About Anything Here, Anything At All
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

HD-35 Braces

Post by Darryl Young »

John or anyone else, have you had a chance to look at the braces on an HD-35? The 35 series normally has 1/4", tapered bracing and the HDs normally have 5/16" scalloped bracing.........so I guess the HD-35 has 1/4", scalloped bracing? I would like to see a pic of that bracing.......curious how much it's scalloped etc.
Slacker......
tippie53
Posts: 7118
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: HD-35 Braces

Post by tippie53 »

On a D35 the braces are all 1/4 inch even the scalloped ones.
http://www.martinguitar.com/guitars/fea ... acing.html
Did you check the bracing library at the UMGF ?
http://theunofficialmartinguitarforum.y ... xmCDYF2G9s

Spoke to Martin and the bracing is shaped the same as the HD 28 but 1/4 inch bracing.
It is all cut on the same machine
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Herman

Re: HD-35 Braces

Post by Herman »

i never played a d35. Does it play or sound different to a d28?

Herman
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: HD-35 Braces

Post by Darryl Young »

Some folks think the D-35s are typically louder than D-28 (1/4" bracing maybe???). My guess is that using narrower bracing that it is less likely a D-35 is overbuilt (just a guess). I've played some that sounded great......and a few that sounded ok but nothing special. That has been my experince with D-28s as well.

I've not played the new HD-35 but did listen to a YouTube video where a guy plays one and he bragged about the bass response.
Slacker......
Jim_H
Posts: 506
Joined: Tue Sep 06, 2011 2:51 pm
Location: Bothell, WA USA

Re: HD-35 Braces

Post by Jim_H »

I Played a 70's era D-35 a while back. To me it played more like a Gibson Jumbo. Kind of a smooth, strummy sort of sound. It didn't have near the projection of a typical D-28 or the like.

Of course all of this is subjective.
My poorly maintained "Blog"
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: HD-35 Braces

Post by Darryl Young »

Jim_H wrote:I Played a 70's era D-35 a while back. To me it played more like a Gibson Jumbo. Kind of a smooth, strummy sort of sound. It didn't have near the projection of a typical D-28 or the like.

Of course all of this is subjective.
Yes.......and every guitar is different.......
Slacker......
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: HD-35 Braces

Post by Darryl Young »

Here is an interesting discussion on the AGF........

http://www.taylorguitarforum.com/forums ... p?t=147444
Slacker......
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: HD-35 Braces

Post by Darryl Young »

What does the "S" stand for in D-35S?
Slacker......
JRHall
Posts: 104
Joined: Mon Jul 26, 2010 7:17 am
Location: Columbia, South Carolina

Re: HD-35 Braces

Post by JRHall »

Darryl Young wrote:What does the "S" stand for in D-35S?
It means it is a 12 fret neck.
If you can't do something well, learn to enjoy doing it poorly.
Jim_H
Posts: 506
Joined: Tue Sep 06, 2011 2:51 pm
Location: Bothell, WA USA

Re: HD-35 Braces

Post by Jim_H »

Darryl Young wrote:
Jim_H wrote:I Played a 70's era D-35 a while back. To me it played more like a Gibson Jumbo. Kind of a smooth, strummy sort of sound. It didn't have near the projection of a typical D-28 or the like.

Of course all of this is subjective.
Yes.......and every guitar is different.......
Yes, and recalling back, this one had some issues. Namely it needed a neck reset. The saddle was almost down to the bridge and the break angle was very low.
My poorly maintained "Blog"
Post Reply